DIY Halloween Witch Please Trucker Hat

September 27, 2022

Use the Cricut Hat Press, glitter iron-on vinyl, and a trucker hat blank to create this sassy and sparkly DIY Halloween Witch Please Trucker Hat!

This post may contain affiliate links.  Making a purchase through one of these links helps support this blog.

Part of our office is also my craft room.  I keep my Cricut machines in there along with a big supply of vinyl and blanks.  While I was going through my hat blanks, I thought it might be cute to make myself a trucker hat for Halloween.  I wanted to put a sassy saying on the front like “Witch Please” and use glitter iron-on vinyl for the design.

While I started working on this project, I realized that this would be a good project to share since not everyone likes dressing up for Halloween.  If you want to keep it casual, throw on a Halloween hat and take the little monsters trick-or-treating!  Or, if you’re a big Halloween lover, like I am, rock this hat all spooky season long!

This trucker hat project is so simple to make with Cricut’s Hat Press.  Just cut out iron-on vinyl (I cut purple glitter iron-on with my Cricut Joy), weed it, then press it onto the trucker hat blank using the Hat Press and Cricut Heat app.  Learn more about the Cricut Hat Press here.

DIY Halloween Witch Please Trucker Hat

This is an easy Cricut project to get you in the Halloween spirit! It has a sassy witch design on front that’s perfect for spooky season!

To start this hat, open the “Witch Please” design file in Design Space.  Resize it, if necessary, and continue to cut the image.  Make sure that the image is mirrored before cutting!  Weed the design.

Position the trucker hat blank onto the hat form.  Then, open the Cricut Heat app and set the time and temperature for the hat blank and material.

Preheat the hat blank according to the app.  Then, position the design onto the hat and secure with heat resistant tape.  Move the Hat Press back and forth and side to side to iron the design onto the hat.

The app will let you know when the liner is cool enough to remove.  You can always go by touch.  Just be careful!  Once the liner is cool, carefully remove it from the design.

After that, you’re all set to rock your Halloween trucker hat all throughout spooky season!

SUPPLIES

STEPS

  1. Open the design file in Design Space.  Resize, if necessary, to fit the hat blank.
  2. Then, prepare a mat with iron-on vinyl, make sure the image is mirrored, and cut.
  3. Weed the design.  Then, attach to the hat blank using Strong Heat Resistant Tape.
  4. Open the Cricut Heat app and follow the project prompts to heat the Hat Press.
  5. Then, place the Hat Press onto the iron-on surface and move it slowly, side to side, until the Hat Press beeps.
  6. Allow the iron-on to cool completely and then carefully peel back the tape and liner to complete the project.

As a spooky season lover, it was only right that I branched out from just wearing Halloween shirts.  I can’t wait to throw on this fun and sparkly “witch please” hat when I head out and about this month!

Did you make this DIY Halloween Witch Please Trucker Hat? Share it on social media using the hashtag #livinglavidadiy. Don’t forget to tag me @lavidaholoka!

PIN FOR LATER

If you like this post, you might enjoy these as well: